? Input supply voltage: 110V ~ 220V AC.
? Output voltage 50V-220V(Output voltage < = Input supply voltage).
? Maximum output power 2000W.
? Maximum output current 25A.
? Operation environment temperature -20? - 40?.
? Module size: 1.85×1.38×1.06 inches (No knobs included).
? Knob diameter: 0.79 inches.
? Net weight: 1.76 ounce.
? This controller uses high-quality SCR. And the max current is up to 25A.
? For the safety, we suggest the continuous load current is within 5A.
? This AC voltage regulator can be used to control AC motor speed, AC light and heating wire temperature.
? Inductive or Capacitive Load power should be reduced. For example, recommended for motors within 1000W.
? Before you attempting to wire the controller, make sure all power is disconnected.
? Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram" (NO.6 picture).
? Turn on the power, and adjust the potentiometer.
? If the adjustment range is found to be narrow, please adjust the blue potentiometer on the product counterclockwise to set the maximum adjustment range to 50V to input voltage.
1 × AC Motor Speed Controller
?Perfomance?Input supply voltage 110V ~ 220V AC. Output voltage 50V-220V(Output voltage < = Input supply voltage). Maximum output power 2000W. Maximum output current 25A. Operation environment temperature -20? - 40?, high efficiency, high torque, low heat generating.
?Use?Connect this product in series in the lamp or the electric circuit (ie, disconnect the lamp or the electrical appliance from any of the live or neutral wires, connect the two wires of the product), rotate the potentiometer screw rod, can play the role of light and shade regulation, speed regulation, voltage regulation, temperature regulation. The inductive or capacitive load power should be reduced, for example, motors under 1000W are recommended.
?Material?The original imported chip custom thyristor, using high voltage capacitor, metal film resistor, ST imported trigger diode. The regulator can regulate the output minimum voltage through a precision multi-turn potentiometer. Potentiometers are equipped with nuts that can be used without any components, making them very convenient and practical.
?Specifications?Module size: 1.85×1.38×1.06 inches (No knobs included). Knob diameter: 0.79 inches. Net weight: 1.76 ounce. Package Included: 1 × AC Motor Speed Controller.
?Application?Product uses new bidirectional high-power thyristor with current up to 25A, which solves the problem of overcurrent caused by the low resistance of the electric furnace wire under the cooling condition. It's convenient to adjust the output voltage of the mains for use by electrical appliances. Such as: circuit, water heater heating, lighting dimming, small motor speed regulation, electric iron temperature adjustment. Can supply power less than 2000W of large electrical appliances.